MASTER MOORING
|
Is a mooring device produced in two dimensions for vessel
till 40 m (120 ft) lenght Is the only one able to support
very high loads (3-4 tons!) this by its very high tecnologist
components as:
-
Hardware realized in stainless steel HR (17/4/PH*)
with resistanceb of 120-140 Kg. x square mm
-
Compression stopper realized in nylon U.V. protected
-
Elastomers element with exceptional propeties (-40°C
÷ +120°C) and with a life of minimum of 400.000
maximal compression
-
Dimension and weights reducead at 1/4 compeared to
others competitor device
*
| load
of break aisi 316 |
load
of break Titanio |
load
of break 17/4PH |
|
60÷80
Kg./mm2
|
90÷94
Kg./mm2
|
120÷140
Kg./mm2
|
Important notices
The thechnology and the modulation of the "MASTER
MOORING" system due to its elastomers produced with
different capacity (60/70/90 shore degrees) enable us to
satisfay every mooring needs of yours for boats from 16
tons up to 130 tons.
Master mooring 20 - cod. 806-0020 |
| 806-0020 |
Weight Kg. 3.00 |
Lenght 400 mm. |
Diameter 100 mm. |
for boat up tons 16 ÷ 25 |
| 806-0021 |
Weight Kg. 3.00 |
Lenght 400 mm. |
Diameter 100 mm. |
for boat up tons 25 ÷ 35 |
| 806-0022 |
Weight Kg. 3.00 |
Lenght 400 mm. |
Diameter 100 mm. |
for boat up tons 35 ÷ 45 |
Master mooring 30 - cod. 806-0030 |
| 806-0030 |
Weight Kg. 3.40 |
Lenght 460 mm. |
Diameter 100 mm. |
for boat up tons 45 ÷ 55 |
| 806-0031 |
Weight Kg. 3.40 |
Lenght 460 mm. |
Diameter 100 mm. |
for boat up tons 55 ÷ 70 |
| 806-0032 |
Weight Kg. 3.40 |
Lenght 460 mm. |
Diameter 100 mm. |
for boat up tons 70 ÷ 90 |
Master mooring giga - cod. 806-0040 |
| Weight Kg. 4.10 |
Lenght 560 mm. |
Diameter 100 mm. |
for boat up tons 90 ÷ 130 |
|
|
